Motorycle Sealant removal expert - Looking for an expert

[wmmason]

Hey All,

My cx500 80's tank has a leak on the RHS weld seam - I have discovered the previous owner has already put a tank sealant in. So now the job of removing the existing sealant, and replacing it begings.

After talking with a couple of experts in tank sealing / removing I've decided to not do the job myself (due to the amount of chemicals and time required to properly remove the current seal).

However all these guys i've spoken too are located in Victoria.

Ideally i'd like to reach out to somone in the greater Sydney area.

Does anyone know of someone who offers these services in greater Sydney?

Cheers

Will

[CX PHREAK]

If you have flakes of the liner throw a few in acetone for a test. This supposedly eats most tank liners.

[bahn88]

Might also be worth posting the details of the "experts" you contacted......

Some experts are well known as "gurus" or "the go to" in the motorcycle community....others advertise themselves as experts in all areas of restoration..... but their claims/results are lesser known