Puggle

A A A A Author Topic: 3D modelling expert - anyone here?  (Read 164 times)

jhovel

3D modelling expert - anyone here?
« Started on: 23-Aug-20, 20:28 »
I'm in the process of 3D modelling the cooling inlet grilles for the turbo CXs - and intend to model the CX650T outlet grilles as well - soon.
However, after 5 failed attempts, I'm close but pulling my hair out :)
I'm having trouble getting the curved outlines of the horizontal fins sorted.... I'm missing a concept or two.
I'm using Fusion360 and can use and have Inventor as well.
Is there anyone reading this forum who can give me a bit of time and advice/help?

doddsy1000

Re: 3D modelling expert - anyone here?
« Reply #1 on: 23-Aug-20, 21:30 »
I'm sorry that's not in my ball park Joe.

However, Autodesk does have a forum for users to help each other (like this site) if you haven't already checked that avenue.

It's at https://forums.autodesk.com/t5/fusion-360/ct-p/1234

The 500T grills is an admirable project too.  Mine had broken in half on one side.  I was lucky to get a replacement from a wrecked bike.

jhovel

Re: 3D modelling expert - anyone here?
« Reply #2 on: 24-Aug-20, 13:11 »
Yes, Doddsy, I am a member on that forum.

Cheers,

Joe


J.C.

Re: 3D modelling expert - anyone here?
« Reply #3 on: 24-Aug-20, 19:09 »
I do a lot of 3D modelling (now my primary business is 3D designing and printing) but I don't use either of those programs, so my experience in this area may not be of much use.

jhovel

Re: 3D modelling expert - anyone here?
« Reply #4 on: 24-Aug-20, 19:51 »
Hi Jim. What software do you use?

Cheers,

Joe


J.C.

Re: 3D modelling expert - anyone here?
« Reply #5 on: 25-Aug-20, 13:26 »
Responded to your email.

DanielKoerichRocha

Re: 3D modelling expert - anyone here?
« Reply #6 on: 26-Aug-20, 15:39 »
I wouldn't say I know all the tricks in the books but I do that for living so might be able to help. I have very limited experience with Inventor and none with Fusion 360. I use Solidworks. Send me an email to danielkoerich1987@hotmail.com and let me know what you are struggling with.

 


Website and forum protected by
┬áSTOP FORUM SPAM     Bad Behavior     Let's Encrypt

SimplePortal 2.3.6 © 2008-2014, SimplePortal