Puggle

A A A A Author Topic: SUZUKI DRZ400 00-14 FORSETI IGNITION COIL SPARK For Rae San Ignition System  (Read 142 times)

redrover

Hi
Has any one used or brought one of these coils for the Rae San ignitions.
I have read in Motorfaction that they reckon the Suzuki DRZ400 coils fit.
They appear to be what is needed but for some reason Japbike spares in brisbane wont give me the Primary reading in Ohms?!
The value has to be 3ohms.
Can anyone help.
Thanks in advance.

J.C.

Hmm that page was written before the Rae Sans were released - I don’t have any data about them specifically relating to that system.

I used a DRZ400 coil with the stock CDI and Ignitech and it worked well.

bahn88

You could maybe contact someone at whites to see what coils fit your specs...

Possibly this-as listed for a CX650.....

https://www.whitesmoto.com.au/products/wpelc04120125 with 2.58 primary

Rayman

that will work - presuming we are talking abotu the TAI setup -
2.5 to 5ohm is the recommended range -

Regards
Rayman

 


Website and forum protected by
 STOP FORUM SPAM     Bad Behavior     Let's Encrypt

Puggle
SimplePortal 2.3.6 © 2008-2014, SimplePortal