Puggle

A A A A Author Topic: CX500 Eurosport restoration LT / The Shed build  (Read 146 times)

Rocklizardlt

CX500 Eurosport restoration LT / The Shed build
« Started on: 30-Dec-19, 18:52 »
Hi everyone,

I am located in Lithuania (we beleive that it is center of europe).
I have '82 CX500 Eurosport that is meant to be restored and possibly put some cafe racer touches to it.

I start this thread to post my progress and possibly get some constructive suggestions on how to do it and do it better.

Jobs to be done:
1) solve  preasure blows back to one carb;
2) overheating coolant
3) electrical problems ( no short lights)
4) front fork oil leak;
5) gear shifter oil leak;
5)...

  [ You are not allowed to view attachments ]  
  [ You are not allowed to view attachments ]  
  [ You are not allowed to view attachments ]  

Rocklizardlt

Now sitting with problem No1.

My research on the web and some suggestion from CX500forum members showed to burnt intake valve.
So i took of valve head.
From first inspection (and water leak test) this theory did not confirm.
I am about to disassemble the valves to see if the seating is ok.
Few pictures:
  [ You are not allowed to view attachments ]
 

bahn88

its a learning experience-haven't tackled a CX full rebuild myself (only CB250s and CB350s..lol) so can't advise a lot....
good luck

Suggest any specific technical questions to "ask the gurus" -they are always helpful especially if you have already done "basic research"-all the best.




 


Website and forum protected by
┬áSTOP FORUM SPAM     Bad Behavior     Let's Encrypt

Puggle
SimplePortal 2.3.6 © 2008-2014, SimplePortal