Turbos > Turbo - Interchangeable Parts

3D printer files for Clock and trip meter setting


Looks like the clock and trip meter knobs are no longer available or difficult to find.
I've 3D modeled them and put the files on Thingiverse: https://www.thingiverse.com/thing:4575818
The screws required to fit them are M2.3x8mm Philipshead countersunk.
They are very difficult to find (at least for me). A tap to recut the threads after they have broken off or rusted in is even more difficult....
However, the pitch of M2.5 screws is identical and taps to recut the thread after drilling the old hole or screw to 2.05mm (or2.1mm) are relatively easy and cheap to get. So if you are planning to repair the threads, go to M2.5 x 8 instead....


[0] Message Index

Go to full version