Puggle

A A A A Author Topic: Followup on Previous Post  (Read 230 times)

joethebike

Followup on Previous Post
« Started on: 16-Sep-21, 07:18 »
I just cannot find my recent post about the misfire and backfire through the carburettors on my 500EC when revving over 4500 on a recent ride and the measures taken to address the issue.

But I can report that the mechanical advance retard mechanism was not the culprit, or the spark igniters or the pulsar coils.
I had replaced the plug leads, carefully cleaned out the plug caps and replaced the D8EA spark plugs, with yesterdays ride showing a very noticeable improvement in general running and a surprising increase in power as the bike revved right out on a fast run.
Joe

 


Website and forum protected by
┬áSTOP FORUM SPAM     Bad Behavior     Let's Encrypt

Puggle
SimplePortal 2.3.6 © 2008-2014, SimplePortal