Puggle

A A A A Author Topic: Taper Roller conversion for steering head  (Read 20706 times)

jhovel

Re: Taper Roller conversion for steering head
« Reply #150 on: 22-Oct-14, 23:02 »
That's not a standard bearing number, just the size with 'H' for 'Honda' in front of it.... it won't help much to source it locally, I'm afraid.
The top one is H2648.515  for 26x48.5x15mm sizes.

Leonardovans

Re: Taper Roller conversion for steering head
« Reply #151 on: 22-Oct-14, 23:57 »
I saw that. thanks.

I was looking for the top one, and the seal specifications.

cheers

jhovel

Re: Taper Roller conversion for steering head
« Reply #152 on: 23-Oct-14, 00:01 »
I gave you the top one above. 26x48.5x15mm
The seal is also a 'special': it's a radial seal with an axial lip and is 50mm OD, 30mm ID and the body is about 0.9mm thick. SO it's juat a thin washer with a vulcanised on rubber sealing outer edge.
There is no top seal.

Leonardovans

Re: Taper Roller conversion for steering head
« Reply #153 on: 23-Oct-14, 05:37 »
Thanks for that. I emailed some local bearing and seal places here, I'll wait to see what they say.
I send you another PM.

white knight

Re: Taper Roller conversion for steering head
« Reply #154 on: 23-Oct-14, 07:59 »
Buy the Pyramid kit off Joe and you will end up with all you need for the job together with the full instructions that are on this thread,then you cant go wrong.-WK

Leonardovans

Re: Taper Roller conversion for steering head
« Reply #155 on: 23-Oct-14, 18:40 »
I want to do that, only thing is I can't wait another 4 weeks as I live in Cape Town. Seems I have no choice though.

Joe, I sent you a PM yesterday, let's do this!

 


Website and forum protected by
┬áSTOP FORUM SPAM     Bad Behavior     Let's Encrypt

SimplePortal 2.3.6 © 2008-2014, SimplePortal