Puggle

A A A A Author Topic: Side stand needed  (Read 125 times)

82cx500

Side stand needed
« Started on: 05-Mar-21, 09:51 »
Hi team I require a side stand / kick stand for a 1982 cx500E
I’m located in Sydney but am willing to take one from anywhere
Cheers Amos

Onetrack

Re: Side stand needed
« Reply #1 on: 06-Mar-21, 07:20 »
I have one here that needs some repair, the little wire frame at the foot has come off and needs rewelding.  Be aware there are a lot of variations among side stands, It turns out that the 500EC stand is 12mm longer than the 650 equivalent with other minor differences.  The one I have is for a 500 Euro.
"Young" Les F

82cx500

Re: Side stand needed
« Reply #2 on: 06-Mar-21, 15:27 »
Great mate
I’m not so worried about the little wire bit on the end that should be an easy fix.
Just as long as the main support has not been cut and welded, how much would you want for it and where are you located?
Thanks mate

Onetrack

Re: Side stand needed
« Reply #3 on: 06-Mar-21, 16:58 »
You can have it for the cost of postage.  I am located in Cairns, Queensland.  I am in the process of culling the huge pile of Euro spares I gathered over the last 30 years mostly at very little cost.  This stand has not been chopped about and not too worn on the foot. Just a check, length from bolt centre to heel is 20cm
"Young" Les F

82cx500

Re: Side stand needed
« Reply #4 on: 06-Mar-21, 17:22 »
That is great thank you so much Les
I really appreciate it.
I have sent you a personal message with my mobile number for further correspondence

 


Website and forum protected by
 STOP FORUM SPAM     Bad Behavior     Let's Encrypt

SimplePortal 2.3.6 © 2008-2014, SimplePortal